Company news
Industry news
Air Compressors
Retainer Limitator
Precautions for using wholesale 8KC air compressor
Time:
2022-12-19
Precautions for using wholesale 8KC air compressor
1. Keep the lubricating oil in the oil pool within the range of the scale. Before operating the wholesale 8KC air compressor, check that the oil volume in the lubricator should not be lower than the scale line value.
2. Check whether the moving parts are flexible, whether the connecting parts are tight, whether the lubrication system is normal, whether the motor and electrical control equipment are safe and reliable.
3. Before operating the wholesale 8KC air compressor, check whether the protective devices and safety accessories are in good condition.
4. Check whether the exhaust pipe is unblocked.
5. Connect the water source and open the water inlet valves to make the cooling water unblocked.
6. When operating the wholesale 8KC air compressor, it should be noted that after a long period of inactivity, before starting again, it must be checked by cranking, and pay attention to whether there is any impact, jamming or abnormal noise.
7. The machine must be started in the no-load state, and after the no-load operation is normal, the air compressor will gradually enter the load operation.
8. When operating the wholesale 8KC air compressor, after normal operation, you should always pay attention to the readings of various instruments and adjust them at any time.
9. During the operation of the wholesale 8KC air compressor, the following conditions should also be checked:
Whether the temperature of the motor is normal, and whether the readings of the ammeters are within the specified range.
Whether the operation sound of each machine is normal.
Check whether the suction valve cover is hot, and whether the sound of the valve is normal.
Whether the various safety protection equipment of wholesale 8KC air compressor is reliable.
Related news