Requirements for operating 8KC air compressor from China manufacturer:
1. When operating the 8KC air compressor from China manufacturer, it should be noted that before starting for the first time after a long period of inactivity, it must be cranked to check whether there is any impact, jamming or abnormal noise.
2. The machine must be started under no-load condition. After the no-load operation is normal, the air compressor will gradually enter into the load operation.
3. When operating the 8KC air compressor from China manufacturer, you should always pay attention to the readings of various instruments after normal operation, and adjust them at any time.
4. After the 8KC air compressor from China manufacturer is operated for 2 hours, the oil and water in the oil-water separator, intercooler and aftercooler must be discharged once, the oil and water in the air storage bucket must be discharged once every shift.

5. After the operation of the 8KC air compressor from China manufacturer is completed, close the cooling water inlet valve after parking.
6. If the machine stops due to power failure, the motor should be restored to the starting position to prevent accidents caused by the failure of the starting controller when the power supply is restored.
7. The operation of the motor part must be carried out in accordance with the relevant regulations of the motor.
8. The power part must comply with the relevant regulations of the internal combustion engine.
9. When operating the 8KC air compressor from China manufacturer, the air storage cylinder, safety valve, pressure gauge and other safety accessories must meet the requirements of the Ministry of Railways for the safety technology of compressed air storage cylinders.
10. The air filter of the 8KC air compressor from China manufacturer must be cleaned frequently and kept unblocked to reduce unnecessary power loss.